|
|
|
|
|
|
31 Aug 2010 |
Chartered Structural Engineer
(From: Unspecified To: Unspecified) |
Carlisle - Cumbria - England - North West |
 |
My client is currently looking to appoint a highly motivated and enthusiastic Chartered Structural Engineer into their Carlisle Office. The ideal candidate will have previous experience in an engineering consultancy, and also ideally a site environment. You will be responsible for the provision of a broad range of services to their clients and will carry projects from inception through to ....,
 |
|
26 Aug 2010 |
Wind Farm Leader (Maintenance Management)
(From: Unspecified To: Unspecified) |
England - England - London |
 |
RESPONSIBILITIES
* If an Incident occurs, coordinate all the necessary resources for everyday activities;
* Provide the necessary prevention of work-related risks training to all new employees;
* Inform to the EHS Department about the accidents and carry out the relevant analysis;
* Use the area manager's guidelines to gain knowledge of and carry out the Corrective Maintenance ....,
|
|
26 Aug 2010 |
Senior Project Assurance Consultant, Wind Sectors
(From: Unspecified To: Unspecified) |
Romsey - Hampshire - England - South East |
|
Locations: Romsey, Bath, Glasgow, Den Haag (Netherlands), Hamburg (Germany)
Salary: Competitive
Our client is currently looking to recruit Senior Project Assurance Consultants to provide project assurance and technical support to key accounts in onshore and offshore wind and other renewable technologies ....,
|
|
26 Aug 2010 |
Process Engineer (Biomass/ Waste Energy)
(From: Unspecified To: Unspecified) |
Brighton - East Sussex - England - South East |
|
JOB CATEGORY
* Energy
JOB DESCRIPTION
The client renewables team is looking for a process engineer to take a role in the development of biomass/waste powered energy technologies. Their services include due diligence, owner's engineer and feasibility studies for a variety of new and emerging technologies such as carbon capture and storage, biomass combustion, energy from waste ....,
|
|
25 Aug 2010 |
Front of House/Administration Support
(From: 14040 To: 14872 £ GBP per year) |
Scarborough - North Yorkshire - England - Yorkshire |
 |
My Client, a leader in their sector is seeking an efficient front of house, administration support person for a full time permanent position based in Scarborough town centre.
The successful applicant will be working within a team of 10 employees and will be required to provide an efficient and effective front of house and administration back up service ....,
|
|
25 Aug 2010 |
Geo CAD Technicain
(From: 20 To: 20 per hour) |
Higham Ferrers - Northamptonshire - England - East Midlands |
 |
Excellent opportunity for an Environmental CAD Technician. Working for a well respected company based in Northamptonshire. The contract will be for a period of 3 months duration based at our Higham Ferrers, Northamptonshire office.
Must have experience in Holebase, AutoCAD Ltd.....,
|
|
25 Aug 2010 |
Geo CAD Technician
(From: 20 To: 20 per hour) |
Higham Ferrers - Northamptonshire - England - East Midlands |
|
Excellent opportunity for an Environmental CAD Technician. Working for a well respected company based in Northamptonshire. The contract will be for a period of 3 months duration based at our Higham Ferrers, Northamptonshire office.
Must have experience in Holebase, AutoCAD Ltd.....,
|
|
25 Aug 2010 |
Skilled Labourer
(From: 8.00 To: 8.00 per year) |
London - Central London - England - London |
|
Skilled labourers required for positions across London and South East, must be switched on labourers that have the ability to think for themselves rather than someone doing it for them.
Must have CSCS card ( NO CERTIFICATE PLEASE ) and must have previous site experience as will be working on London's biggest projects.....,
|
|
24 Aug 2010 |
Solar Business Leader - Brighton
(From: 35000 To: 45000 £ GBP per year) |
Brighton - East Sussex - England - South East |
|
JOB PROFILE
The new employee will not only provide Project Management and technical input to our PV and CSP project work (Lenders due diligence and Owners engineering) but in addition will have the primary responsibility for driving the solar business forward in their role as 'Solar Business Leader' ....,
|
|
19 Aug 2010 |
HGV Class 1
(From: Unspecified To: Unspecified) |
Kings Lynn - Norfolk - England - East Anglia |
 |
We are requiring HGV I drivers for our prestige client based in Wissington Nr Kings Lynn (PE33 9QG) We are the preferred supplier for this contract. This is for ongoing contract work Monday to Sunday either days or nights.
You will need to attend a training day at the sugar beet site which will consist of Driver Assessment, Walk round checks and some class room training ....,
|
|
19 Aug 2010 |
TIG Welder
(From: 10 To: 10 per year) |
Derby - Derbyshire - England - East Midlands |
 |
Skilled TIG Welder to work on the construction of stainless steel products for
the process industry. Applicants must be used to working with brushed
stainless steel box section up to 5mm thick. Must be able to weld to a high
standard.....,
|
|
19 Aug 2010 |
Sheet Metal Worker
(From: 10 To: 10 per year) |
Derby - Derbyshire - England - East Midlands |
|
Skilled Sheet Metal Worker to work on the construction of stainless steel items for the process industry. Applicants must be time served and able to work from drawings on 5mm thick box section brushed stainless steel.....,
|
|
18 Aug 2010 |
Freelance Estimator – Water Sector – South East London
(From: 30 To: 35 £ GBP per hour) |
Reading - Berkshire - England - South East |
 |
Foxwell Brown Ltd: Bespoke Recruitment Services. We find and connect the best people with the best jobs, both permanent and freelance.
This new opportunity has just been created with our client, a leading civil engineering firm. Based in Reading, you will work as part of a bids and tenders team, producing costings for water and sewerage-related schemes as part of a multi ....,
|
|
18 Aug 2010 |
CNC Machinist
(From: 9.20 To: 9.20 per hour) |
Derby - Derbyshire - England - East Midlands |
|
This position involves setting and operating a CNC vertical milling machine with Fanuc controls. Applicants must have previous experience of working on these type of machines and control systems. There is a morning and afternoon shift system in place, and a 15% shift premium paid on top of the basic wage. ....,
|
|
16 Aug 2010 |
Electrical/Electronics Technician
(From: 19500 To: 20000 £ GBP per year) |
York - North Yorkshire - England - Yorkshire |
|
Assemble electronic/electrical subassemblies from schematic diagrams, drawings or verbal instructions and following works order instructions to ISO9001 standards.
Wire and solder wiring harness and cable assemblies, PC boards, SMT, transformer
assemblies, control consoles, connectors, etc.
Carry out heavy-duty cable wiring, deck cable assembly, and control system outfitting ....,
|
LIGHT
